Guangzhou Pine Grease Co., Ltd. purchases KCB483.3 stainless steel gear pump . The customer uses KCB483.3 stainless steel gear pumps to transport pine nut oil. The pump has a flow rate of 29m3/h and a pressure of 0.36Mpa. The pump mainly co...

The correct and stable operation of the heat transfer oil pump is conducive to the smooth operation of the pump and the extension of its service life. The following is an introduction to the starting and operation of the hot oil pump : Firs...

The ambient temperature of the magnetic pump in spring and summer should be less than 42℃, and the temperature rise of the motor should not exceed 75℃. (1) The ambient temperature of the SUS magnetic pump in use should be 42℃, and the...

Installation of magnetic pump 1. Make the concrete foundation according to the installation size of the pump 2. Before installation, check the pump and motor. All parts should be intact and there should be no debris in the pump. 3. Put the...

Magnetic drive pump s can meet 90% of all application areas of sealless pumps. This pump has complete technical specifications, economical price, short delivery time, convenient use, does not require electricians to participate in maintenan...

The rated pressure of a high viscosity gear pump refers to the higher allowable pressure of a SUS high viscosity gear pump during continuous operation, and its working pressure is determined by the external load. The life of a high-viscosit...

Considering the viscosity of the medium delivered by the high viscosity gear pump , the speed range of the SS high viscosity gear pump can be determined. According to the speed range of the high-viscosity gear pump and the normal flow range...

The high viscosity rotor pump is used to transport high-viscosity resin, polyurethane, polymyth, polyethylene and other similar high-viscosity materials; especially suitable for the transportation of high-viscosity consistency media; The pu...