What is the difference between a gear pump and a stainless steel gear pump? The working principle is the same, and the efficiency achieved is similar. But otherwise, the working principle of the gear pump is the same as the stainless steel...

1. Repair of driving shaft and bushing after wear After the gear pump drive shaft and the bush are worn, the matching clearance increases, which will definitely affect the pump oil volume. In case of this, the method of repairing the drivin...

Gear pump is a rotary pump that transports liquid or pressurizes it by the change and movement of the working volume formed between the pump cylinder and the meshing gear. The structure of the external gear pump china . A pair of meshing ge...

Gear pump , flow: 10m3/h, pressure: 0.6Mpa, suction vacuum height of 5 meters, caliber 65mm, with motor: Y132M1-6. YCB arc gear pumps is a type of positive displacement pump. Two enclosed spaces are composed of two gears, a pump body, and f...

The gear pump uses two gears to mesh with each other to work, which does not require high media. The general pressure is below 6MPa, and the flow rate is relatively large. The gear oil pump is equipped with a pair of rotary gears in the pum...

(1) Add or replace engine oil that meets the required brand to the specified oil level according to the season. Take out the foreign objects in the tubing and tighten the bolts or nuts at the joints; (2) Replace the aging or damaged skeleto...

Advantages of internal gear pump The internal gear pumps conveys liquid smoothly, without pulsation, low vibration and low noise. Internal gear pump has strong self-priming performance. The internal gear pump selects the correct parts and m...

1) The thermal insulation asphalt pump has a simple and compact structure and is easy to install and use. 2) It has good self-priming performance, no need to add liquid before starting the pump each time, so it is very convenient to use. ,...