Everyone knows that KCB stainless steel gear pump is a kind of gear pump with acid and wear resistance. Install the driving shaft and the driven shaft on the casing, install the gear on the part of the driving shaft in the casing, and insta...

If there is a safety valve on the back cover of the insulated asphalt pump . The rear cover can be removed integrally with the safety valve; before removing the rear cover, a mark should be made to mark the relative position of the pump cov...

The gears of high-viscosity pumps commonly include straight teeth, helical teeth, herringbone teeth, and helical teeth. The tooth profiles are mainly involute and arc types. The width of the teeth of SS high-viscosity pumps used in high-pre...

Polyurethane composite materials are commonly known as PU materials, foam materials, composite materials, black materials, white materials, and black oil and butter. They are used for building insulation, solar energy, water heaters, cold s...

After the stainless steel gear pump is used, if the surface or inner cavity of the SS gear pump is repaired again, it will be dirty. Many customers do not pay much attention to the cleaning work during the repair, which makes the SS gear oi...

After disassembling the stainless steel gear oil pump , the order is not paid attention to. Some parts seem to have no direction on the surface, and they can be installed at a glance, but they are not. For example, the back end cover of a s...

Stainless steel gear pumps need to be overhauled regularly. If the flow rate or pressure drops, the bearing sleeve is seriously worn and needs to be replaced. Check whether the meshing surface of the SS gear oil pump gear is worn, and the t...

Generally speaking, there are the following types of problems: 1. Overvoltage and excessive excitation current have the risk of breakdown. 2. The winding is grounded. 3. Short circuit of winding. 4. The winding is broken. 5. The winding lac...