The stainless steel gear pump is mainly composed of gears, shafts, pump bodies, valves, shaft end seals and other components. The gears have high hardness and strength after heat treatment, and are installed in the interchangeable shaft sle...

First of all, we must understand the working principle of stainless steel gear pump s and gear oil pump s. Two gears of the same size mesh with each other in a tightly matched housing. The inside of the housing is similar to a figure eight....

The 4 common methods of maintaining the KCB gear oil pump are as follows: 1. Note that the SS KCB gear oil pump should be kept in a dry, clean and free of corrosive gas. 2. The SS KCB gear oil pumps is frequently inspected and repaired, and...

When installing the parts in the pump body of the KCB stainless steel gear pump , do not bring any debris and pollution. The parts must be cleaned with kerosene and coated with lubricant. When the upper and lower bearing seats of the KCB st...

The stainless steel gear pump will inevitably encounter the gear stuck when it enters the dirty things suddenly. At this time, it is necessary to disassemble the KCB stainless steel gear pump . Next, I will tell you the correct disassembly...

The newly installed stainless steel gear pump should check the following items for the first time: 1. Whether the valves on the inlet and outlet pipes of the SS gear pump are all open. 2. Whether the steering of the SS gear oil pumps is cor...

High viscosity gear pumps usually deliver medium with a relatively high viscosity. When selecting a high-viscosity gear pump , the number of revolutions of the selected gear motor must be determined according to the conveyed medium. The hig...

The high-viscosity pump has been widely used in the transportation of high-viscosity media. The correct selection of the supporting safety valve of the high viscosity pump can not only effectively increase the service life of the high-visco...